GENCO / TRANSCO Coaching

Batches started
General Studies Test
Basic Engineering
Specialization
Near JNTU Main Gate,
KPHB Colony, Hyderabad

Syllabus for Electronics and Communication Engineering (EC)

Engineering Mathematics
Linear Algebra:
Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus:
Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green's theorems.

Differential equations:
First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy's and Euler's equations, Initial and boundary value problems, Partial Differential Equations and variable separable method.

Complex variables:
Analytic functions, Cauchy's integral theorem and integral formula, Taylor's and Laurent' series, Residue theorem, solution integrals.

Probability and Statistics:
Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial distribution, Correlation and regression analysis.

Numerical Methods:
Solutions of non-linear algebraic equations, single and multi-step methods for differential equations.

Transform Theory:
Fourier transform, Laplace transform, Z-transform.

Electronics and Communication Engineering

Networks:
Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton's maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks.

Electronic Devices:
Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin-tub CMOS process.

Analog Circuits:
Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and wave-shaping circuits, 555 Timers. Power supplies.

Digital circuits:
Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing.

Signals and Systems:
Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems.

Control Systems:
Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral-Derivative (PID) control. State variable representation and solution of state equation of LTI control systems.

Communications:
Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.

Electromagnetics:
Elements of vector calculus: divergence and curl; Gauss' and Stokes' theorems, Maxwell's equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.

Books to refer:

NETWORKS
1. NETWORK ANALYSIS - Vanvalkenberg (3rd Edition)
2. ENGG CIRCUIT ANALYSIS – Hayt & Kemmerly ( 5th Edition)
3. NETWORKS & SYSTEMS – Roy chowary
4. NETWORKS & LINES - John. D. Ryder
5. CIRCUIT ANALYISI - Clayton R. Paul

EDC AND ANLOG CIRCUTS
1. EDC – MILLAN & HALKIAS
2. INTIGRATED ELECTRONICS – MILLMAN & HALKIAS
3. MICRO ELECTRONICS – MILLAMAN & GRABEL
4. LINEAR 1Cs – ROY & CHOWDARY
5. EDC – JOHN PAUL

PULSE AND DIGITALCIRCUITS
1. PULSE DIGITAL AND SWITCHING WAVE FORMS – MILLMAN & TAUB
2. MODERN DIGITAL ELECTRONICS – R.P. JAIN
3. WAVE FORM GENERATIONS & SHAPING – STRAUSS
4. SOLID STATE PULSE CIRCUITS – DAVID BELL


DIGITAL ELECTRONICS & MICROPROCESSORS
1. SWITCHING & FINITE AUTOMATA THEORY – KOHAVI
2. DIGITAL DESIGN – MORRIS MANO
3. MODERN DIGITAL ELECTRNICS – R.P. JAIN
4. MICROPROCESSORS – RAMESH . GOANKAR (4TH EDITION)

SIGNALS & SYSTEMS
1. SINGNALS AND SYSTEMS – OPPENHEIM & NAWAB
2. SIGNALS & SYSTEMS – CARLSON
3. SIGNALS & SYSTEMS - B. P. LATHY
4. SIGNALS AND SYSTEMS - SIMON KAYKIN
COMMUNICATION SYSTEMS
1. COMMUNICATION SYSTEMS- SIMON HAYKIN 3RD ED
2. PRINCIPLES OF COMMUNICATIONS SYSTEM – TAUB & SCHILLING
3. MODERN DIGITAL & ANOLG COMMUNIATION SYSTEMS- B.P. LATHY
4. COMUNICATION SYSTEMS – SINGH & SAPRE

CONTROL SYSTEMS
1. CONTROL SYSTEM ENGG- NAGARATHI AND GOPAL. M
2. AUTOMATIC CNTROL SYSTEMS – B.C.KUO

ELECTROMAGNETIC THEORY
1. ENGG ELECTROMAGNETICS – WILLIAM HAYT
2. ELECTROMAGNETIC WAVES & RADIATING SYSTEMS – JORDAN & BABLIM
3. MICRO WAVE DEVICES & CIRCUITS – SAMULE. Y. LAIAO
4. ELECTROMAGNETICS - SADIKU

TOP

Syllabus for Electrical Engineering (EE)

ENGINEERING MATHEMATICS
Linear Algebra:
Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.
Calculus:
Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.

Differential equations:
First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s and Euler’s equations, Initial and boundary value problems, Partial Differential Equations and variable separable method.

Complex variables:
Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’ series, Residue theorem, solution integrals.

Probability and Statistics:
Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson,Normal and Binomial distribution, Correlation and regression analysis.

Numerical Methods:
Solutions of non-linear algebraic equations, single and multi-step methods for differential equations.

Transform Theory:
Fourier transform,Laplace transform, Z-transform.

ELECTRICAL ENGINEERING
Electric Circuits and Fields:
Network graph, KCL, KVL, node and mesh analysis, transient response of dc and ac networks; sinusoidal steady-state analysis, resonance, basic filter concepts; ideal current and voltage sources, Thevenin’s, Norton’s and Superposition and Maximum Power Transfer theorems, two-port networks, three phase circuits; Gauss Theorem, electric field and potential due to point, line, plane and spherical charge distributions; Ampere’s and Biot-Savart’s laws; inductance; dielectrics; capacitance.

Signals and Systems:
Representation of continuous and discrete-time signals; shifting and scaling operations; linear, time-invariant and causal systems; Fourier series representation of continuous periodic signals; sampling theorem; Fourier, Laplace and Z transforms.

Electrical Machines:
Single phase transformer – equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers – connections, parallel operation; auto-transformer; energy conversion principles; DC machines – types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors; three phase induction motors – principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines – performance, regulation and parallel operation of generators, motor starting, characteristics and applications; servo and stepper motors.

Power Systems:
Basic power generation concepts; transmission line models and performance; cable performance, insulation; corona and radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow; voltage control; power factor correction; economic operation; symmetrical components; fault analysis; principles of over-current, differential and distance protection; solid state relays and digital protection; circuit breakers; system stability concepts, swing curves and equal area criterion; HVDC transmission and FACTS concepts.

Control Systems:
Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Niquist techniques; Bode plots; root loci; lag, lead and lead-lag compensation; state space model; state transition matrix, controllability and observability.

Electrical and Electronic Measurements:
Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy and power factor; instrument transformers; digital voltmeters and multimeters; phase, time and frequency measurement; Q-meters; oscilloscopes; potentiometric recorders; error analysis.

Analog and Digital Electronics
:
Characteristics of diodes, BJT, FET; amplifiers – biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; operational amplifiers – characteristics and applications; simple active filters; VCOs and timers; combinational and sequential logic circuits; multiplexer; Schmitt trigger; multi-vibrators; sample and hold circuits; A/D and D/A converters; 8-bit microprocessor basics, architecture, programming and interfacing.

Power Electronics and Drives:
Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs – static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters – fully controlled and half controlled; principles of choppers and inverters; basis concepts of adjustable speed dc and ac drives.

Books to refer:

ELECTRICAL MACHINES
1.Electrical machinery-Dr.P.S.BIMBHRA
2.Electrical machines- NAGARATH & KOTHARI

POWER SYSTEMS
1.Electrical power systems-C.LWADHWA
2.Modern power system analysis-I.J.NAGARATH,D.P.KOTHARI
3.A textbook of power system analysis-WILLIAM D.STEVENSON JR.

ELECTRICAL AND ELECTRONIC MEASUREMENTS
1.A course in electrical and electronic measurements and instrumentation-A.K.SAWHNEY
2.Modern electronic instrumentation and measurement techniques-Albert D.Helfrick,William D.Cooper

POWER ELECTRONICS AND ELECTRIC DRIVES
1.Power electronics -Dr.P.S.BIMBHRA
2.Power electronics-(2nd edition) MUHAMMED H.RASHEED
3.Power electronics-M.DSINGH&KHANCHANDANI
4.Fundamentals of electric drives-G.K.DUBEY

NETWORKS
1. NETWORK ANALYSIS - Vanvalkenberg (3rd Edition)
2. ENGG CIRCUIT ANALYSIS – Hayt & Kemmerly ( 5th Edition)
3. NETWORKS & SYSTEMS – Roy chowary
4. NETWORKS & LINES - John. D. Ryder
5. CIRCUIT ANALYSIS - Clayton R. Paul

ELECTROMAGNETIC THEORY
1. ENGG ELECTROMAGNETICS – WILLIAM HAYT
2. ELECTROMAGNETIC WAVES & RADIATING SYSTEMS – JORDAN & BABLIM
3. MICRO WAVE DEVICES & CIRCUITS – SAMULE. Y. LAIAO
4. ELECTROMAGNETICS - SADIKU

CONTROL SYSTEMS
1. CONTROL SYSTEM ENGG- NAGARATHI AND GOPAL. M
2. AUTOMATIC CNTROL SYSTEMS – B.C.KUO

EDC AND ANALOG CIRCUITS
1. EDC – MILLAN & HALKIAS
2. INTIGRATED ELECTRONICS – MILLMAN & HALKIAS
3. MICRO ELECTRONICS – MILLAMAN & GRABEL
4. LINEAR ICs – ROY & CHOWDARY
5. EDC – JOHN PAUL

PULSE AND DIGITAL CIRCUITS
1. PULSE DIGITAL AND SWITCHING WAVE FORMS – MILLMAN & TAUB
2. MODERN DIGITAL ELECTRONICS – R.P. JAIN
3. WAVE FORM GENERATIONS & SHAPING – STRAUSS
4. SOLID STATE PULSE CIRCUITS – DAVID BELL

DIGITAL ELECTRONICS&MICROPROCESSORS
1. SWITCHING & FINITE AUTOMATA THEORY – KOHAVI
2. DIGITAL DESIGN – MORRIS MANO
3. MODERN DIGITAL ELECTRNICS – R.P. JAIN
4. MICROPROCESSORS – RAMESH . GOANKAR (4TH EDITION)

TOP

Syllabus for Instrumentation Engineering (IN)

ENGINEERING MATHEMATICS
Linear Algebra:
Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus:
Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.

Differential equations:
First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s and Euler’s equations, Initial and boundary value problems, Partial Differential Equations and variable separable method.

Complex variables:
Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’ series, Residue theorem, solution integrals.

Probability and Statistics:
Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson,Normal and Binomial distribution, Correlation and regression analysis.

Numerical Methods:
Solutions of non-linear algebraic equations, single and multi-step methods for differential equations.

Transform Theory:
Fourier transform,Laplace transform, Z-transform.

INSTRUMENTATION ENGINEERING
Basics of Circuits and Measurement Systems:Kirchoff’s laws, mesh and nodal Analysis. Circuit theorems. One-port and two-port Network Functions. Static and dynamic characteristics of Measurement Systems. Error and uncertainty analysis. Statistical analysis of data and curve fitting.

Transducers, Mechanical Measurement and Industrial Instrumentation: Resistive, Capacitive, Inductive and piezoelectric transducers and their signal conditioning. Measurement of displacement, velocity and acceleration (translational and rotational), force, torque, vibration and shock. Measurement of pressure, flow, temperature and liquid level.Measurement of pH, conductivity, viscosity and humidity.

Analog Electronics: Characteristics of diode, BJT, JFET and MOSFET. Diode circuits. Transistors at low and high frequencies, Amplifiers, single and multi-stage. Feedback amplifiers. Operational amplifiers, characteristics and circuit configurations. Instrumentation amplifier. Precision rectifier. V-to-I and I-to-V converter. Op-Amp based active filters. Oscillators and signal generators.

Digital Electronics:
Combinational logic circuits, minimization of Boolean functions. IC families, TTL, MOS and CMOS. Arithmetic circuits. Comparators, Schmitt trigger, timers and mono-stable multi-vibrator. Sequential circuits, flip-flops, counters, shift registers. Multiplexer, S/H circuit.Analog-to-Digital and Digital-to-Analog converters. Basics of number system.Microprocessor applications, memory and input-output interfacing. Microcontrollers.

Signals, Systems and Communications:
Periodic and aperiodic signals. Impulse response, transfer function and frequency response of first- and second order systems. Convolution, correlation and characteristics of linear time invariant systems. Discrete time system, impulse and frequency response. Pulse transfer function. IIR and FIR filters. Amplitude and frequency modulation and demodulation. Sampling theorem, pulse code modulation. Frequency and time division multiplexing. Amplitude shift keying, frequency shift keying and pulse shift keying for digital modulation.

Electrical and Electronic Measurements:
Bridges and potentiometers, measurement of R,L and C. Measurements of voltage, current, power, power factor and energy. A.C & D.C current probes. Extension of instrument ranges. Q-meter and waveform analyzer. Digital voltmeter and multi-meter. Time, phase and frequency measurements. Cathode ray oscilloscope. Serial and parallel communication. Shielding and grounding.

Control Systems and Process Control:
Feedback principles. Signal flow graphs. Transient Response, steady-state-errors. Routh and Nyquist criteria. Bode plot, root loci. Time delay systems. Phase and gain margin. State space representation of systems. Mechanical, hydraulic and pneumatic system components. Synchro pair, servo and step motors. On-off, cascade, P, P-I, P-I-D, feed forward and derivative controller, Fuzzy controllers.

Analytical, Optical and Biomedical Instrumentation:
Mass spectrometry. UV, visible and IR spectrometry. X-ray and nuclear radiation measurements. Optical sources and detectors, LED, laser, Photo-diode, photo-resistor and their characteristics. Interferometers, applications in metrology. Basics of fiber optics. Biomedical instruments, EEG, ECG and EMG. Clinical measurements. Ultrasonic transducers and Ultrasonography. Principles of Computer Assisted Tomography.

Books to refer:

INSTRUMENTATION ENGINEERING
MEASUREMENT SCIENCE:
1.ELECTRICAL & ELECTRONIC MEASUREMENTS - A.K. sawhney
2.INSTRUMENTATION MEASUREMENTS &ANALYSIS - Nakara & Chaudary
3.MEASUREMENT & INSTRUMENTATION - Rangan & Sharma
4.INDUSTRIAL INSTRUMENTATION - Donald P Eckman
5.MECHANICAL MEASUREMENTS - D.S. Kumar

TRANSDUCERS & NON-ELECTRICAL QUANTITIES:
1)INSTRUMENTATION- Nakara & Chaudary
2)INSTRUMENTATION- Rangan & Sharma
3)ELECTRICAL & ELECTRONICS INSTRUMENTATION - A.K.Sawhney
4)MEASUREMENT SYSTEM- Doeblin

ELECTRICAL & ELECTRONIC MEASUREMENTS
1.A course in electrical and electronic measurements and instrumentation-A.K.SAWHNEY
2.Modern electronic instrumentation and measurement techniques-Albert D.Helfrick,William D.Cooper

ANALYTICAL , BIOMEDICAL & OPTICAL ENGINEERING
1)ANALYTICAL INSTRUMENTATION - Ewing
2)INSTRUMENTAL METHODS OF ANALYSIS - Williard
3)BIOMEDICAL INSTRUMENTATION & MEASUREMENTS – Crom Well
4)BIOMEDICAL INSTRUMENTATION - Dr.M.Arumugam

CONTROL SYSTEMS
1. CONTROL SYSTEM ENGG- NAGARATHI AND GOPAL. M
2. AUTOMATIC CNTROL SYSTEMS – B.C.KUO

PROCESS CONTROL TECHNOLOGY:
1.CHEMICAL PROCESS CONTROL - George Stephanopolus
2.PROCESS CONTROL TECHNOLOGY - Curitus Johnson

EDC AND ANALOG CIRCUITS
1. EDC – MILLAN & HALKIAS
2. INTIGRATED ELECTRONICS – MILLMAN & HALKIAS
3. MICRO ELECTRONICS – MILLAMAN & GRABEL
4. LINEAR 1Cs – ROY & CHOWDARY
5. EDC – JOHN PAUL

PULSE AND DIGITAL CIRCUITS
1. PULSE DIGITAL AND SWITCHING WAVE FORMS – MILLMAN & TAUB
2. MODERN DIGITAL ELECTRONICS – R.P. JAIN
3. WAVE FORM GENERATIONS & SHAPING – STRAUSS
4. SOLID STATE PULSE CIRCUITS – DAVID BELL

DIGITAL ELECTRINICS & MICROPROCESSORS
1. SWITCHING & FINITE AUTOMATA THEORY – KOHAVI
2. DIGITAL DESIGN – MORRIS MANO
3. MODERN DIGITAL ELECTRNICS – R.P. JAIN
4. MICROPROCESSORS – RAMESH . GOANKAR (4TH EDITION)

SIGNALS & SYSTEMS
1. SINGNALS AND SYSTEMS – OPPENHEIM & NAWAB
2. SIGNALS & SYSTEMS – CARLSON
3. SIGNALS & SYSTEMS - B. P. LATHY
4. SIGNALS AND SYSTEMS - SIMON KAYKIN

COMMUNICATION SYSTEMS
1. COMMUNICATION SYSTEMS- SIMON HAYKIN 3RD ED
2. PRINCIPLES OF COMMUNICATIONS SYSTEM – TAUB & SCHILLING
3. MODERN DIGITAL & ANOLG COMMUNIATION SYSTEMS- B.P. LATHY
4. COMUNICATION SYSTEMS – SINGH & SAPRE

TOP

Syllabus for Mechanical Engineering (ME)

ENGINEERING MATHEMATICS
Linear Algebra:
Matrix algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus:
Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.

Differential equations:
First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables:
Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series.

Probability and Statistics:
Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson,Normal and Binomial distributions.

Numerical Methods:
Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations.

APPLIED MECHANICS AND DESIGN

Engineering Mechanics:
Free body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear and angular) and energy formulations; impact.

Strength of Materials:
Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts; Euler’s theory of columns; strain energy methods; thermal stresses.

Theory of Machines:
Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear trains; flywheels.

Vibrations:
Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts.

Design:
Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings, brakes and clutches.

FLUID MECHANICS AND THERMAL SCIENCES
Fluid Mechanics:
Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; viscous flow of incompressible fluids; boundary layer; elementary turbulent flow; flow through pipes, head losses in pipes, bends etc.

Heat-Transfer:
Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, unsteady heat conduction, fins; dimensionless parameters in free and forced convective heat transfer, various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis; heat exchanger performance, LMTD and NTU methods.

Thermodynamics:
Zeroth, First and Second laws of thermodynamics; thermodynamic system and processes; Carnot cycle.irreversibility and availability; behaviour of ideal and real gases, properties of pure substances, calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to energy conversion.

Applications:
Power Engineering: Steam Tables, Rankine, Brayton cycles with regeneration and reheat. I.C. Engines: air-standard Otto, Diesel cycles. Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, Reverse Brayton cycle; moist air: psychrometric chart, basic psychrometric processes. Turbomachinery:Pelton-wheel, Francis and Kaplan turbines — impulse and reaction principles, velocity diagrams.

MANUFACTURING AND INDUSTRIAL ENGINEERING
Engineering Materials:
Structure and properties of engineering materials, heat treatment, stress-strain diagrams for engineering materials.

Metal Casting:
Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations.

Forming:
Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy.

Joining:
Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding.

Machining and Machine Tool Operations:
Mechanics of machining, single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, principles of design of jigs and fixtures

Metrology and Inspection:
Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly.

Computer Integrated Manufacturing:
Basic concepts of CAD/CAM and their integration tools.

Production Planning and Control:
Forecasting models, aggregate production planning, scheduling, materials requirement planning.

Inventory Control:
Deterministic and probabilistic models; safety stock inventory control systems.

Operations Research:
Linear programming, simplex and duplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.

Books to Refer:


THERMAL ENGINEERING
1.THERMODYNAMICS :
1.:Engineering Thermodynamics by P.K.NAG
2:production Thermodynamics by Y.A.CENGEL & M.A.BOLES
3.Thermal Engineering by R.K.RAJPUT
4.Thermal Engineering by M.L.MATHUR & F.S.MEHTA
5.Thermodynamics by C.P.ARORA
6.Thermodynamics and Heat Engines(vol 1 & 2) by R.YADAV
7.Introduction to Thermodynamics by Y.V.C.RAO
8.Thermal Engineering(vol 1& 2) by Y.V.YADAV

2.I.C.ENGINES
1. A TEXT OF INTERNAL COMBUSTION ENGINES by V.GANESAN
2: THERMAL ENGINEERING by M.L MATHUR & F.S.MEHTA
3: THERMAL ENGINEERING by R.K.RAJPUT

3.REFRIGERATION AND AIR CONDITIONING
1: Refrigeration and Air Conditioning by C.P.ARORA
2: Thermal Engineering by R.K.RAJPUT
3: Thermal Engineering by M.L.MATHUR and F.S.MEHTA

4.FLUID MECHANICS AND TURBOMACHINERY:
1:FLUID MECHANICS and HYDRAULIC MACHINES by
MODI & SETHI
2: FLUID MECHANICS and HYDRAULIC MACHINES by
Dr.R.K.BANSAL
3: FLUID MECHANICS by Dr.A.K.JAIN
4: FLUID MECHANICS by V.L.STREETER & E.B.WYLIE
5: FLUID MECHANICS by K.SUBRAMANYA


5. ENGINEERING HEAT AND MASS TRANSFER:
1: HEAT TRANSFER by J.P.HOLMAN
2: Fundamentals Of Engineering Heat and Mass Transfer by R.C.SACHDEVA
3: Heat and Mass Transfer by Dr. D.S.KUMAR
4: Heat and Mass Transfer by YADAV
5: Heat and Mass Transfer by S.C.ARORA & DOMKUNDWAR

6. ENGINEERING MECHANICS:
1. Engineering Mechanics by S.TIMOSHENKO & YOUNG
2. Engineering Mechanics (statics & Dynamics) by A.K. TAYAL
3. Engineering Mechanics (statics & Dynamics) by F.L. SINGER
4. Engineering Mechanics of solids by EGOR P. POPOV

7. STRENGTH OF MATERIALS:
1. Strength of Materials by S.TIMOSHENKO and YOUNG
2. Strength of Materials by Dr. SADHU SINGH
3. Strength of Materials by EGOR P.POPOV
4. Strength of Materials by JUNNAKR
5. Strength of Materials ( Practical Approach) by Dr. S. PRAKASHA RAO

8.MACHINE DESIGN:
1.Design of Machine Elements by V.B.BHANDARI
2.Machine Design by PANDYA and SHAH
3.Machine Design by R.S.KHURMI and J.K.GUPTA
4.Design of Machine Elements by SHIGLEY
5.Machine Design by BLACK and ADAM
6.Machine Design by M.F.SPOFFS

9. PRODUCTION ENGINEERING
JOINING PROCESSES
1. Manufacturing science by A.GHOSH and A.K.MALLIK
2. Manufacturing Technology by P.N.RAO

FORMING PROCESSES:
1.Manufacturing science by A.GHOSH and A.K.MALLIK
2.Production Engineering by P.C.SHARMA
3.Manufacturing Technology by P.N.RAO
MACHINING AND MACHINE TOOL OPERATIONS
1. Manufacturing science by A.GHOSH and A.K MALLIK
2. Production Engineering by P.C SHARMA
3. Modern machining process by P.C.PANDEY and H.S.SHAW

METAL CASTING
1. Manufacturing science by A.GHOSH and A.K.MALLIK
2. Manufacturing technology by P.N.RAO

OPERATIONS RESEARCH
1. A Text of OPERATIONS RESEARCH by S.D.SHARMA
2. A Text of OPERATIONS RESEARCH by V.K.KAPOOR

INVENTORY CONTROL
1. OPERATIONS RESEARCH by V.K.KAPOOR
2. OPERATIONS RESEARCH by S.D.SHARMA
3. INDUSTRIAL ENGG.AND MANAGEMENT by O.P.KHANNA

ENGINEERING MATERIALS
1.Manufacturing Science by A.GHOSH and A.K.MALLIK
2.Manufacturing Technology by P.N.RAO
3.Machine Design by R.S.KHURMI & J.K.GUPTA
4.Introduction to PHYSICAL METALLURGY by SIDNEY H AVNER
5.Text of MATERIAL SCIENCE by K.G.ASWANI

TOOL ENGINEERING
1.PRODUCTION ENGINEERING by P.C.SHARMA
2.Principles of workshop Technology by A.K.HAJRA CHOUDHARY

PRODUCTION , PLANNING AND CONTROL
1.PRODUCTION ENGINEERING by P.C.SHARMA
2.INDUSTRIAL ENGINEERING and MANAGEMENT by O.P.KHANNA
WORK-STUDY

1.Industrial Engg and Management by O.P.KHANNA
2.Operations Research by V.K.KAPOOR

THEORY OF MACHINES
1.Theory of Machines by R.S.KHURMI & J.K.GUPTA
2.Theory of Machines by S.S.RATAN
3.Theory of Machines and mechanisms by J.E.SHIGLEY & J.J.UICKER

VIBRATIONS
1.THEORY OF MACHINES by S.S.RATAN
2.THEORY OF MACHINES by R.S.KHURMI & J.K.GUPTA
3.MECHANICAL VIBRATIONS by G.K.GROOVER
1: Longitudinal Vibrations: sol:18.1 to 18.15

MEROLOGY AND INSPECTION
1.ENGINEERING MEROLOGY by R.K.JAIN
2.Engineering Metrology by MAHAJAN

TOP

Syllabus for Civil Engineering (CE)

ENGINEERING MATHEMATICS
Linear Algebra:
Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.

Calculus:
Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.

Differential equations:
First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables:
Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series.

Probability and Statistics:
Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.

Numerical Methods:
Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations.

STRUCTURAL ENGINEERING
Mechanics:
Bending moment and shear force in statically determinate beams. Simple stress and strain relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr’s circle. Simple bending theory, flexural and shear stresses, unsymmetrical bending, shear centre. Thin walled pressure vessels, uniform torsion, buckling of column, combined and direct bending stresses.

Structural Analysis:
Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods, analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures. Basic concepts of matrix methods of structural analysis.

Concrete Structures:
Concrete Technology- properties of concrete, basics of mix design. Concrete design- basic working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods. Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads.

Steel Structures:
Analysis and design of tension and compression members, beams and beam- columns, column bases. Connections- simple and eccentric, beam–column connections, plate girders and trusses. Plastic analysis of beams and frames.

GEOTECHNICAL ENGINEERING
Soil Mechanics:
Origin of soils, soil classification, three-phase system, fundamental definitions, relationship and interrelationships, permeability &seepage, effective stress principle, consolidation, compaction, shear strength.

Foundation Engineering:
Sub-surface investigations- scope, drilling bore holes, sampling, penetration tests, plate load test. Earth pressure theories, effect of water table, layered soils. Stability of slopes-infinite slopes, finite slopes. Foundation types-foundation design requirements. Shallow foundations-bearing capacity, effect of shape, water table and other factors, stress distribution, settlement analysis in sands & clays. Deep foundations–pile types, dynamic & static formulae, load capacity of piles in sands & clays, negative skin friction.

WATER RESOURCES ENGINEERING
Fluid Mechanics and Hydraulics:
Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli’s equation, laminar and turbulent flow, flow in pipes, pipe networks. Concept of boundary layer and its growth. Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump. Forces on immersed bodies, flow measurements in channels, tanks and pipes. Dimensional analysis and hydraulic modeling. Kinematics of flow, velocity triangles and specific speed of pumps and turbines.

Hydrology:
Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing. Well hydraulics.

Irrigation:
Duty, delta, estimation of evapo-transpiration. Crop water requirements. Design of: lined and unlined canals, waterways, head works, gravity dams and spillways. Design of weirs on permeable foundation. Types of irrigation system, irrigation methods. Water logging and drainage, sodic soils.

ENVIRONMENTAL ENGINEERING
Water requirements:
Quality standards, basic unit processes and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water. Sewage and sewerage treatment, quantity and characteristics of wastewater. Primary, secondary and tertiary treatment of wastewater, sludge disposal, effluent discharge standards. Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment Unit operations and unit processes of domestic wastewater, sludge disposal.

Air Pollution:
Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits.

Municipal Solid Wastes:
Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).

Noise Pollution: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution.

TRANSPORTATION ENGINEERING
Highway Planning:
Geometric design of highways, testing and specifications of paving materials, design of flexible and rigid pavements.

Traffic Engineering:
Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capacity.

SURVEYING
Importance of surveying, principles and classifications, mapping concepts, coordinate system, map projections, measurements of distance and directions, leveling, theodolite traversing, plane table surveying, errors and adjustments, curves.

Books to refer:

STRENGTH OF MATERIALS:
1. Strength of Materials by S.TIMOSHENKO and YOUNG
2. Strength of Materials by Dr. SADHU SINGH
3. Strength of Materials by EGOR P.POPOV
4. Strength of Materials by JUNNAKR
6. Strength of Materials ( Practical Approach) by Dr. S. PRAKASHA RAO

FLUID MECHANICS:
1:FLUID MECHANICS and HYDRAULIC MACHINES by MODI & SETHI
2: FLUID MECHANICS and HYDRAULIC MACHINES by Dr.R.K.BANSAL
3: FLUID MECHANICS by Dr.A.K.JAIN
4: FLUID MECHANICS by V.L.STREETER & E.B.WYLIE
5: FLUID MECHANICS by K.SUBRAMANYA

WATER RESOURCES ENGINEERING
1: FLUID MECHANICS through problems by R.J.GARDE
2: HYDROLOGY by JAYARAMI REDDY
3: IRRIGATION ND WATER POWER ENGG. by B.C.PUNMIA and PANDE B B Lal

ENVIRONMENTAL ENGINEERING
1: WATER SUPPLY Engineering by S.K.GARG
2 :WATER SUPPLY AND SANITARY ENGINEERING by G.S.BIDIE & J.S.BIRDIE
3 : WASTE WATER TREATMENT by M.N.RAO & A.K.DATTA
4: WATER SUPPLY AND SEWAGE by E.W.STEEL and J.J. Mc GHEE

SOIL MECHANICS
1 : SOIL MECHANICS AND FOUNDATIONS by Dr. B.C.PUNMIA

TRANSPORTATION ENGINEERING
1: PRINCIPLES OF TRANSPORTATION & HIGHWAY ENGINEERING by G.V.RAO
2: TRAFFIC ENGINEERING & TRANSPORT PLANNING by L.R.KADIYALI
3 : HIGHWAY ENGINEERING by KHANNA AND JUSTO
4 : TRAFFIC ANALYSIS by TAYLOR AND YOUNG

SURVEYING
1: SURVEYING AND LEVELLING by N.N.BASU
2 : SURVEYING by K.R.ARORA

TOP

Syllabus for Computer Science and Information Technology (CS)

ENGINEERING MATHEMATICS

Mathematical Logic:
Propositional Logic; First Order Logic.

Probability:
Conditional Probability; Mean, Median, Mode and Standard Deviation; Random Variables; Distributions; uniform, normal, exponential, Poisson, Binomial.
Set Theory & Algebra:
Sets; Relations; Functions; Groups; Partial Orders; Lattice; Boolean Algebra.

Combinatory:
Permutations; Combinations; Counting; Summation; generating functions; recurrence relations; asymptotics.

Graph Theory:
Connectivity; spanning trees; Cut vertices & edges; covering; matching; independent sets; Colouring; Planarity; Isomorphism.

Linear Algebra:
Algebra of matrices, determinants, systems of linear equations, Eigen values and Eigen vectors.

Numerical Methods:
LU decomposition for systems of linear equations; numerical solutions of non-linear algebraic equations by Secant, Bisection and Newton-Raphson Methods; Numerical integration by trapezoidal and Simpson’s rules.

Calculus:
Limit, Continuity & differentiability, Mean value Theorems, Theorems of integral calculus, evaluation of definite & improper integrals, Partial derivatives, Total derivatives, maxima & minima.

COMPUTER SCIENCE AND INFORMATION TECHNOLOGY
Digital Logic:
Logic functions, Minimization, Design and synthesis of combinational and sequential circuits; Number representation and computer arithmetic (fixed and floating point).

Computer Organization and Architecture:
Machine instructions and addressing modes, ALU and data-path, CPU control design, Memory interface, I/O interface (Interrupt and DMA mode), Instruction pipelining, Cache and main memory, Secondary storage.

Programming and Data Structures:
Programming in C; Functions, Recursion, Parameter passing, Scope, Binding; Abstract data types, Arrays, Stacks, Queues, Linked Lists, Trees, Binary search trees, Binary heaps.

Algorithms:
Analysis, Asymptotic notation, Notions of space and time complexity, Worst and average case analysis; Design: Greedy approach, Dynamic programming, Divide-and-conquer; Tree and graph traversals, Connected components, Spanning trees, Shortest paths; Hashing, Sorting, Searching. Asymptotic analysis (best, worst, average cases) of time and space, upper and lower bounds, Basic concepts of complexity classes – P, NP, NP-hard, NP-complete.

Theory of Computation:
Regular languages and finite automata, Context free languages and Push-down automata, Recursively enumerable sets and Turing machines, Undecidability.

Compiler Design:
Lexical analysis, Parsing, Syntax directed translation, Runtime environments, Intermediate and target code generation, Basics of code optimization.

Operating System:
Processes, Threads, Inter-process communication, Concurrency, Synchronization, Deadlock, CPU scheduling, Memory management and virtual memory, File systems, I/O systems, Protection and security.

Databases:
ER-model, Relational model (relational algebra, tuple calculus), Database design (integrity constraints, normal forms), Query languages (SQL), File structures (sequential files, indexing, B and B+ trees), Transactions and concurrency control.

Information Systems and Software Engineering:
information gathering, requirement and feasibility analysis, data flow diagrams, process specifications, input/output design, process life cycle, planning and managing the project, design, coding, testing, implementation, maintenance.

Computer Networks:
ISO/OSI stack, LAN technologies (Ethernet, Token ring), Flow and error control techniques, Routing algorithms, Congestion control, TCP/UDP and sockets, IP(v4), Application layer protocols (icmp, dns, smtp, pop, ftp, http); Basic concepts of hubs, switches, gateways, and routers. Network security – basic concepts of public key and private key cryptography, digital signature, firewalls.

Web technologies:
HTML, XML, basic concepts of client-server computing.

Books to refer:

BASIC MATHEMATICS
1. THEORY & PROBLEMS OF PROBABILITY -LIPSCHUTZ (MC HILL, SCHAM)
2. PROBABILITY, RANDOM VARIABLES & RANDOM SIGNAL PRINCIPLES - PEEBLES
3. MILLER & FREUND’S PROBABILITY & SATISFIES FOR ENGINEERS - RICHAD JOHSON
4. THEORY & PROBLEMS OF MATRICES -FRANK AYRES (SCHAUM)
5. NUMERICAL METHODS - VENDAMURTHY & LYMYN (VIKAS)

Discrete Mathematics:
1.DISCRETE MATHEMATICS FOR COMPUTER SCIENTISTS AND MATHEMATICIANS. 2. DISCRETE MATHEMATICAL STRUCTURES -BUSBY (PHI)
3. DISCRETE MATHEMATICAL STRUCTURES WITH APLICATIONS TO COMPUTER SCIENCE.J.P. TREMBLY, R.MANOHAR

THEORY OF COMPUTATION
1. INTRODUCTION TO AUTOMATA THEORY LANGUAGES AND COMPUTATION-JOHN E. HOP CROFT,-RAJEEV. MOTWAHI, ULLMAN.
2. INTRODUCTION TO COMPUTER THEORY - DANIEL I. A COHEN.
3. INTRODUCTION TO LANGUAGES AND THEORY OF COMPUTATION - PETERLINZ

PROGRAMMING METHODOLOGY & DATA STRUCTURES
1. C++ PRIMER -STANLEY B.LIPPMEN, JOSEELAJOIE
2. TEST FOR C++ SKILLS -YASHAVENT KANETKER
3. DATA STRUCTURES AND PROGRAMMING DESIGN –PROBERT L.KRUSE
4. DATA STRUCTURES USING C AND C++ - M. TENENBAUM.
5. DATA STRUCTURES – SEYMOUR LIPSCHUTZ

DESIGN ANALYSIS OF ALGORIHMS
1.FUNDAMENTALS OF COMPUTER ALGORITHMS--ELLIS HOROWITZ,-SARTAJ SAHNI.
2.DATA STRUCTURE AND ALGORITHM ANALYSIS IN C, MARK ALLEN WIESS.

OPERATING SYSTEMS
1. OPERATING SYSTEM CONCEPTS –SILBERCHATZ, GALVIN( 6TH EDITION)
2. MODERN OPERATING SYSTEM-A.S.TANENBAUM (2ND EDITION)
3. OPERATING SYSTEM-WILLIAM STALLINGS (4TH EDITION)

COMPUTER NETWORKS
1. TCP/IP PROTOCOL ----BEHARONG.A.FOROUGAN.
2.COMPUTER NETWORKS ---PETERSON (HAR COURT ASIA)
3.COMPUTER NETWORKS---TENENBAUM(PHI)
4.DATA COMMUNICATIONS AND NETWORKING 3RD EDITION - BEHROUZ A. FOROUZAN

COMPUTER ORGANIZATION & ARCHITECTURE
1. COMPUTER SYSTEM ARCHITECTURE. M MORIS MANO
2. COMPUTER ARCHITECTURE & ORGANIZATION JOHN P HAYES
3. COMPUTER ORGANIZATION. V.CARL HAMACHER
DATA BASE MANAGEMENT SYSTEM
1. DATA BASE SYSTEM CONCEPTS –KORTH (3RD EDITION)
2. AN INTRODUCTION TO DATA BASE SYSTEMS –C.J DATE (7TH)

DIGITAL ELECTRONICS
1.SWITCHING THEORY & FINITE AUTOMATA THEORY-KOHAVI DIGITAL DESIGN – MORRIS MANO

WEB TECHNOLOGIES
1.INTERNET & WORLD WIDE WEB (WWW)
2.JAVA COMPLETE REFERENCE

SOFTWARE ENGINEERING
1.SOFTWARE ENGINEERING 6TH EDITION- ROGER S. PRESSMAN

TOP

All rights reserved@The Engineering Academy